Products/T60/ T60EX
HUGEROCK / T60 HANDHELD PLATFORM

T60EXHazardous-area NFC Inspection Handheld

For hazardous-area inspection and NFC point identification, with configuration reviewed against the certified model, site zone and operating conditions.

5.5″ / 1080×21604G LTE9000mAh1000nitsIP678GB / 128GB
01 / APPLICATION FIT

Match the terminal to your workflow.

For oil, gas and chemical inspection integrators, maintenance teams and compliance leads: review Ex marking, tag protocols and operating workflows.

01 / FIELD WORKFLOW

Oil, gas & chemical facility inspection

02 / FIELD WORKFLOW

Hazardous-area equipment checks

03 / FIELD WORKFLOW

NFC inspection point records

Start with site conditions and certification scope.

T60EX provides a dedicated Ex inspection configuration with NFC reading. Review hazardous-area zone, gas and temperature groups, accessories and charging conditions. Ex capability applies to the certified model and approved configuration, and does not extend to T60, R60 or G60.

02 / ONE PLATFORM, APPLICATION CONFIGURATIONS

Choose the capture configuration for the task.

Compare modular expansion, Ex inspection, barcode and NFC, and specialist positioning configurations. Compare module, memory and OS configurations, then review the corresponding technical specification.

Model selection overview
Selection criteriaT60T60EXR60G60
Capture & applicationModular expansion / T60L configurationNFC / ATEXE20 barcode + NFCMeter-level RTD / dual-frequency RTK / multi-frequency RTK
RAM / storage8GB / 128GB8GB / 128GB8GB / 128GB8GB / 128GB
OS versions & compatibilityAndroid 9/10/11/13 (Continuous updates) with GMSAndroid 9/10/11/13 (Continuous updates) with GMSAndroid 9/10/11/13 (Continuous updates) with GMSAndroid 9/10/11/13 (Continuous updates) with GMS
Ordering & configurationConfirm modules & project configuration0512102405121044Confirm modules & project configuration

RFID, barcode, positioning, NFC and RS232 are optional T60 configurations; expansion positions and combinations depend on the device build. Ex capability applies only to the certified T60EX model and approved configuration.

03 / CAPTURE & INTEGRATION

Connect business data through tags and interfaces.

Review protocols, reading conditions, module combinations and software integration for barcodes, tags and peripherals.

T60EX capture module specifications
Protocol standardISO14443A/B, ISO15693, NFC
Label standardM1(S50, S70), CPU, NFC
Read-write distance2-5cm

II 2G Ex ib IIB T4 Gb · ECM 22 ATEX-B DC69
Confirm suitability against the certified model, certificate scope and operating conditions. Review charging, accessories and use requirements before deployment.

LABELS / PROTOCOLS

Validate real labels

Share barcode formats, tag protocols, material, size and target reading distance.

SOFTWARE / DATA

Integrate business applications

Confirm Android versions, application deployment, module access, offline workflows and data transfer.

POWER / ACCESSORIES

Review power & accessories

Review shifts, charging, grips, straps and optional modules, then validate the complete configuration.

04 / MODEL-SPECIFIC SPECIFICATIONS

T60EX technical specifications

Review hardware, software, interfaces and environmental specifications for the selected model. OS and module combinations are confirmed for the delivery configuration.

Hardware & display

T60EX Hardware & display
CPUARM Cortex A73 octa-core (2.0GHz)
GPUARM Mali-G72 MP3
RAM8G
Internal Memory128G
External MemoryMicro SD card (T-FLASH), max 2TB
Main Camera13.0MP(AF) with flash led
Sub Camera5.0MP
Battery9000mAh
Display5.5 inch IPS/AFFS 1080*2160 FHD industrial 1000 nits Sunlight Readable
Touch PanelCapacitive/frosted tempered film supports glove touch/spray/active capacitive pen

Communications & connectivity

T60EX Communications & connectivity
Phone CallGSM /WCDMA/CDMA 1X/VoLTE
2GGSM/CDMA 1X/EDGE/GPRS/WAP
2G BandGSM(B2/3/5/8)
3GWCDMA 3.75G (HSDPA+42.2Mbps, HSUPA+11.5Mbps), EVDO
3G BandWCDMA(B1/2/5/8), Evdo : BC0/BC1 CDMA : BC0/BC1
4GFDD: 150Mbps down, 50Mbps UP TDD: 150Mbps downlink, 50Mbps uplink
4G BandTD-LTE(B38/39/40/41); FDD LTE (B1/2/3/4/5/7/8/12/17/20/28)
WI-FIDual-band WIFI (2.4GHz/5Ghz) single stream 802.11 a/b/g/n/ac
BT5.0 Low Energy (LE)

Interfaces, sensors & positioning

T60EX Interfaces, sensors & positioning
SIM Card/ TF CardNano SIM card * 2, MicroSD card * 1 (Choose any two out of three)
Headphone3.5mm (CTIA)
Charging interfaceType-C & 4pin pogo pin
Data interfaceUSB Type-C(OTG)*1
Gravity SensorSupport
Magnetic Field SensorSupport
Motion SensorSupport
Gyroscope sensorSupport
Light-sensorSupport
Acceleration SensorSupport
Charger5.0V 2A-10W
NavigationGPS+Beidou+Glonass+AGPS+SBAS (EPO 2.5m)

Mechanical design

T60EX Mechanical design
Size195*98*22mm(L×W×H)
Weight490g
Color & MaterialBlack&yellow (PC+ABS)

Environment & reliability

T60EX Environment & reliability
Shake-proof1-19Hz/1.0mm ; 19-200Hz/1.0g
Dropproof /IKMIL-STD-810G/Method516.6/Procedure IV & Touch Panel IK05
WaterproofClass 7 ( IEC 60529 )
DustproofClass 6 ( IEC 60529 )
Operating temperature-20°C to 55°C
Storage Temperature-40°C to 80°C
ReliabilityMTBF>5000h; MTTR<0.5h
RH5% to 95%
Operating AltitudeMax: 4,500 m(15,000 feet)

OS & service

T60EX OS & service
OSAndroid 9/10/11/13 (Continuous updates) with GMS
Ex-MarkingII 2G Ex ib IIB T4 Gb
Certificate NO.ECM 22 ATEX-B DC69
Warranty24 months (12-month battery warranty)
05 / RESOURCES & DELIVERY

From selection to project delivery.

Download the selected model documentation, then review software, modules, tags, accessories and deployment volume with SOTEN.

01 / DEFINE

Define the workflow

Deployment regions, workflow, operating conditions and business software.

02 / VALIDATE

Validate modules & integration

Real labels, interface protocols, OS versions and device accessories.

03 / DEPLOY

Confirm build & delivery

Exact model, configuration list, volume, testing and rollout schedule.

Discuss project & configuration needs ↗

sales@soten.com.cn ↗

T60EX selection & system integration

Check T60EX certificate scope, validity and approved modules/accessories against country, zone, gas/dust and temperature requirements. Then validate inspection software, interfaces, mounting and power.

For: Energy project integrators, inspection software providers and compliance buyers

Check model datasheets · Prepare SDK and application interfaces · Discuss your project configuration

Your next industrial innovation.
Starts with engineering.

Talk to SOTEN about your application, device configuration and system integration.

Contact SOTEN
YOUR PROJECT REQUIREMENTS

Prepare your project brief

Describe your application and integration requirements. Download the brief to your device and share it with SOTEN when you are ready.

IP Geolocation by DB-IP